P0705moderate severityPowertrain
Transmission Range Sensor Circuit (PRNDL Input)
on 2014 Jeep Cherokee 3.2L V6 · AWD
What this code means
Malfunction in the transmission range sensor (also called neutral safety switch or PRNDL switch).
Symptoms
- Check Engine Light
- Incorrect gear display
- Starter may not engage
- Harsh or no shifting
- Backup lights not working
Common causes
- Faulty range sensor/switch
- Misadjusted linkage
- Wiring damage
- Corroded connector
Diagnostic steps
- Check shift linkage adjustment
- Test range sensor signals
- Inspect wiring
- Verify correct gear indication with scan tool
Repair notes
Adjust linkage or replace range sensor.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1