P2714moderate severityPowertrain
Transmission Shift Solenoid D Intermittent
on 2014 Jeep Cherokee 3.2L V6 · AWD
What this code means
Intermittent electrical fault in shift solenoid D.
Symptoms
- Erratic shifting
- Check engine light
- Intermittent harsh shifts
Common causes
- Solenoid connector issue
- Wiring intermittent
- Solenoid sticking
Diagnostic steps
- Wiggle test connector
- Monitor solenoid operation
- Check wiring
Repair notes
Clean connector. Replace solenoid if intermittent.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1