Back to 2014 Jeep Cherokee
Help
2014 JEEP CHEROKEE
3.2L V6•AWD•AUTOMATIC•gas
13 active safety recalls on this vehicle — view recalls
Founding sponsor spot is openYour name on every procedure for this vehicle, permanently.Sponsor — $99 →
Repairs0Labor1048Torque7111Fluid15DTC1816Battery2Maintenance0Recalls13
P3008low severityPowertrain

Turbo/Supercharger Bypass Valve Control Circuit

on 2014 Jeep Cherokee 3.2L V6 · AWD

What this code means

The turbo bypass valve (diverter valve/blow-off valve) control circuit has a malfunction. The bypass valve recirculates pressurized air during throttle closure.

Symptoms

  • Check Engine Light
  • Compressor surge on deceleration
  • Flutter noise from turbo
  • Reduced boost response after throttle lift
  • Check Engine Light after spirited driving

Common causes

  • Faulty bypass valve solenoid
  • Torn bypass valve diaphragm
  • Wiring issue to solenoid
  • Vacuum line leak
  • PCM driver failure

Diagnostic steps

  1. Test bypass valve solenoid resistance
  2. Inspect vacuum lines to bypass valve
  3. Command solenoid with scan tool
  4. Check valve diaphragm for tears
  5. Inspect wiring and connector

Repair notes

Replace bypass valve or solenoid. Inspect vacuum hoses for cracks.

🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.

Other Powertrain codes on this vehicle

🔌 Need this data in your app? It's all in the free API →
🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years and Jeff Moore · Master Lexus & Toyota Mechanic · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
Share:XRedditFBWhatsAppThreadsEmail
⚠ STILL BEHIND THE PAYWALL
The 2014 Jeep Cherokee repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Jeep Cherokee — $99 →
Building an app?
Free API access to all this data — 20 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →