P0131moderate severityPowertrain
O2 Sensor Circuit Low Voltage Bank 1 Sensor 1
on 2015 Jeep Cherokee 3.2L V6 · AWD
What this code means
The upstream O2 sensor voltage on Bank 1 is staying below 0.45V, indicating a lean condition or sensor fault.
Symptoms
- Check Engine Light
- Lean running
- Poor fuel economy
- Rough idle
Common causes
- Vacuum leak
- Faulty O2 sensor
- Exhaust leak before sensor
- Low fuel pressure
- Faulty fuel injector
Diagnostic steps
- Check for vacuum leaks
- Monitor O2 sensor voltage
- Test fuel pressure
- Perform smoke test on intake
- Inspect O2 sensor
Repair notes
Fix vacuum or exhaust leak. Replace O2 sensor if confirmed faulty.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1