P0730high severityPowertrain
Incorrect Gear Ratio
on 2015 Jeep Cherokee 3.2L V6 · AWD
What this code means
The PCM detected that the actual gear ratio does not match the expected ratio for the commanded gear.
Symptoms
- Check Engine Light
- Transmission slipping
- Harsh shifting
- Flare on shifts
- Limp mode
Common causes
- Worn clutch packs
- Low fluid level
- Faulty shift solenoid
- Internal transmission failure
- Torque converter issue
Diagnostic steps
- Check fluid level and condition
- Monitor gear ratio data with scan tool
- Check for other transmission codes
- Test shift solenoids
- May need internal transmission inspection
Repair notes
Often indicates internal transmission wear. Start with fluid check and solenoid testing.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1