P0740moderate severityPowertrain
Torque Converter Clutch Circuit Malfunction
on 2015 Jeep Cherokee 3.2L V6 · AWD
What this code means
Malfunction in the torque converter clutch (TCC) solenoid circuit.
Symptoms
- Check Engine Light
- No lockup feel (higher RPM at highway)
- Poor fuel economy
- Transmission overheating
Common causes
- Faulty TCC solenoid
- Wiring issue
- PCM driver failure
- Torque converter failure
Diagnostic steps
- Test TCC solenoid resistance
- Check wiring
- Command TCC engagement with scan tool
- Monitor RPM drop during lockup command
Repair notes
Replace TCC solenoid or repair wiring. Solenoid is often inside transmission.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1