P1602critical severityPowertrain
PCM Not Programmed
on 2015 Jeep Cherokee 3.2L V6 · AWD
What this code means
The PCM has not been programmed with the required vehicle-specific calibration software. This typically occurs when a replacement PCM is installed without completing the flash programming procedure.
Symptoms
- Engine will not start
- Check Engine Light on
- Multiple system malfunctions
- No communication with certain modules
Common causes
- Replacement PCM installed without programming
- PCM flash programming interrupted or failed
- PCM memory corruption
- Incorrect PCM part number installed
- Battery disconnected during programming
Diagnostic steps
- Verify PCM part number matches vehicle application
- Attempt to flash program PCM with dealer-level scan tool
- Check for stable battery voltage during programming (use charger)
- Verify VIN is programmed correctly
- Check for software updates or TSBs
Repair notes
Flash program the PCM with the correct vehicle calibration using a dealer-level diagnostic tool.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1