U0033high severityNetwork
Control Module Communication Bus C Shorted To Ground
on 2015 Jeep Cherokee 3.2L V6 · FWD
What this code means
Bus C is shorted to ground, pulling down the signal voltage and killing communication. Modules on this bus cannot share data.
Symptoms
- Multiple warning lights
- Loss of system functions
- No module response
Common causes
- Bus C wire grounded out
- Chafed harness against metal
- Water intrusion causing ground path
- Failed module grounding the bus
Diagnostic steps
- Scan network for faults
- Check bus C for continuity to ground
- Inspect harness routing for chafing
- Disconnect modules to isolate short
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Network codes on this vehicle
U0001
High Speed CAN Communication Bus
U0002
High Speed CAN Communication Bus Performance
U0003
High Speed CAN Communication Bus (+) Open
U0004
High Speed CAN Communication Bus (+) Low
U0005
High Speed CAN Communication Bus (+) High
U0006
High Speed CAN Communication Bus (-) Open
U0007
High Speed CAN Communication Bus (-) Low
U0008
High Speed CAN Communication Bus (-) High
U0009
High Speed CAN Communication Bus Shorted Together
U0010
Medium Speed CAN Communication Bus