B0261low severityBody
Convertible Top Position Sensor
on 2019 Jeep Cherokee 2.4L I4 · 4WD
What this code means
The convertible top position sensor is not reporting valid data, preventing automatic top operation.
Symptoms
- Top auto-open/close not working
- Top stops at random positions
- Must manually assist top movement
- Control module error
Common causes
- Faulty position sensor
- Sensor wiring damage
- Sensor misaligned
- Control module needs recalibration
Diagnostic steps
- Check position sensor output
- Inspect sensor alignment
- Test wiring
- Attempt recalibration procedure
Repair notes
Replace or realign position sensor. Recalibrate top control module.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Body codes on this vehicle
B0001
Driver Frontal Stage 1 Deployment Control
B0001
Driver Frontal Stage 1 Deployment Control
B0002
Driver Frontal Stage 2 Deployment Control
B0002
Driver Frontal Stage 2 Deployment Control
B0003
Passenger Frontal Stage 1 Deployment Control
B0003
Passenger Frontal Stage 1 Deployment Control
B0004
Passenger Frontal Stage 2 Deployment Control
B0004
Passenger Frontal Stage 2 Deployment Control
B0005
Driver Knee Airbag Deployment Circuit
B0005
Driver Knee Airbag Deployment Circuit