B0441low severityBody
Head-Up Display System Malfunction
on 2019 Jeep Cherokee 2.4L I4 · 4WD
What this code means
Malfunction in the head-up display (HUD) projection system.
Symptoms
- HUD image not visible
- HUD image distorted
- HUD brightness incorrect
- HUD position cannot be adjusted
- HUD flickers
Common causes
- Faulty HUD projector unit
- HUD combiner lens damaged
- Windshield not HUD-compatible (aftermarket replacement)
- Wiring issue
- HUD control module fault
Diagnostic steps
- Check HUD fuse
- Test HUD projector unit power
- Inspect combiner lens or windshield coating
- Verify windshield is HUD-compatible
- Check HUD settings in vehicle menu
Repair notes
Replace HUD projector unit. Ensure windshield is HUD-compatible if recently replaced.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Body codes on this vehicle
B0001
Driver Frontal Stage 1 Deployment Control
B0001
Driver Frontal Stage 1 Deployment Control
B0002
Driver Frontal Stage 2 Deployment Control
B0002
Driver Frontal Stage 2 Deployment Control
B0003
Passenger Frontal Stage 1 Deployment Control
B0003
Passenger Frontal Stage 1 Deployment Control
B0004
Passenger Frontal Stage 2 Deployment Control
B0004
Passenger Frontal Stage 2 Deployment Control
B0005
Driver Knee Airbag Deployment Circuit
B0005
Driver Knee Airbag Deployment Circuit