B0641moderate severityBody
A/C Refrigerant Pressure Sensor Circuit
on 2019 Jeep Cherokee 2.4L I4 · 4WD
What this code means
Malfunction in the A/C refrigerant pressure sensor circuit. The sensor monitors system pressure for compressor protection.
Symptoms
- A/C not engaging
- A/C blows warm air
- A/C cycles on and off rapidly
- Incorrect pressure reading on scan tool
Common causes
- Faulty pressure sensor/transducer
- Wiring damage
- Low refrigerant level
- Sensor connector corrosion
- PCM input circuit fault
Diagnostic steps
- Read pressure sensor value with scan tool
- Compare electronic reading to gauge reading
- Test sensor voltage output
- Inspect sensor connector
- Check wiring to PCM
Repair notes
Replace refrigerant pressure sensor or repair wiring. Check refrigerant charge level.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Body codes on this vehicle
B0001
Driver Frontal Stage 1 Deployment Control
B0001
Driver Frontal Stage 1 Deployment Control
B0002
Driver Frontal Stage 2 Deployment Control
B0002
Driver Frontal Stage 2 Deployment Control
B0003
Passenger Frontal Stage 1 Deployment Control
B0003
Passenger Frontal Stage 1 Deployment Control
B0004
Passenger Frontal Stage 2 Deployment Control
B0004
Passenger Frontal Stage 2 Deployment Control
B0005
Driver Knee Airbag Deployment Circuit
B0005
Driver Knee Airbag Deployment Circuit