B2701low severityBody
Power Liftgate Pinch Sensor Circuit
on 2019 Jeep Cherokee 2.4L I4 · 4WD
What this code means
Malfunction in the power liftgate anti-pinch sensor. This safety sensor stops liftgate movement when an obstruction is detected.
Symptoms
- Liftgate reverses immediately when closing
- Liftgate will not close
- Anti-pinch system fault warning
- Power liftgate disabled
Common causes
- Faulty pinch sensor strip
- Sensor wiring damage
- Sensor contaminated with dirt
- Sensor strip out of position
- Control module fault
Diagnostic steps
- Clean pinch sensor strip
- Inspect sensor strip positioning
- Test sensor circuit
- Check wiring
- Recalibrate anti-pinch system
Repair notes
Replace or reposition anti-pinch sensor strip. Clean debris from sensor area.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Body codes on this vehicle
B0001
Driver Frontal Stage 1 Deployment Control
B0001
Driver Frontal Stage 1 Deployment Control
B0002
Driver Frontal Stage 2 Deployment Control
B0002
Driver Frontal Stage 2 Deployment Control
B0003
Passenger Frontal Stage 1 Deployment Control
B0003
Passenger Frontal Stage 1 Deployment Control
B0004
Passenger Frontal Stage 2 Deployment Control
B0004
Passenger Frontal Stage 2 Deployment Control
B0005
Driver Knee Airbag Deployment Circuit
B0005
Driver Knee Airbag Deployment Circuit