B0111low severityBody
Keyless Entry Receiver Circuit
on 2019 Jeep Cherokee 3.2L V6 · AWD
What this code means
Malfunction in the keyless entry receiver module or its circuit. The receiver processes RF signals from the key fob.
Symptoms
- Remote lock/unlock not working
- No response from any key fob
- Physical key still works
Common causes
- Faulty receiver module
- Antenna disconnected
- Wiring damage to receiver
- Receiver power supply issue
Diagnostic steps
- Test receiver power and ground
- Check antenna connection
- Test with key fob held near receiver
- Scan for BCM codes
- Swap receiver if possible
Repair notes
Replace keyless entry receiver module or repair antenna connection.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Body codes on this vehicle
B0001
Driver Frontal Stage 1 Deployment Control
B0001
Driver Frontal Stage 1 Deployment Control
B0002
Driver Frontal Stage 2 Deployment Control
B0002
Driver Frontal Stage 2 Deployment Control
B0003
Passenger Frontal Stage 1 Deployment Control
B0003
Passenger Frontal Stage 1 Deployment Control
B0004
Passenger Frontal Stage 2 Deployment Control
B0004
Passenger Frontal Stage 2 Deployment Control
B0005
Driver Knee Airbag Deployment Circuit
B0005
Driver Knee Airbag Deployment Circuit