C0074moderate severityChassis
Lateral Acceleration Sensor Bias/Offset
on 2019 Jeep Cherokee 3.2L V6 · AWD
What this code means
The lateral acceleration sensor zero-point calibration has drifted beyond acceptable limits.
Symptoms
- Stability control activates on flat road
- ESC warning light on
- Inappropriate stability intervention
Common causes
- Sensor drift over time
- Sensor not mounted level
- Vehicle parked on slope during calibration
- Aftermarket lift kit changing sensor plane
Diagnostic steps
- Check sensor output on level surface
- Perform sensor zero-point calibration on level ground
- Verify sensor mounting angle
- Check for aftermarket ride height modifications
Repair notes
Recalibrate sensor on level ground. Replace if bias persists.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Chassis codes on this vehicle
C0021
LF Wheel Speed Sensor Range/Performance
C0021
LF Wheel Speed Sensor Range/Performance
C0022
RF Wheel Speed Sensor Range/Performance
C0022
RF Wheel Speed Sensor Range/Performance
C0023
LR Wheel Speed Sensor Range/Performance
C0023
LR Wheel Speed Sensor Range/Performance
C0024
RR Wheel Speed Sensor Range/Performance
C0024
RR Wheel Speed Sensor Range/Performance
C0025
LF Wheel Speed Sensor Circuit Intermittent
C0025
LF Wheel Speed Sensor Circuit Intermittent