C0112moderate severityChassis
Brake Apply Circuit High
on 2019 Jeep Cherokee 3.2L V6 · AWD
What this code means
High signal in the brake apply circuit indicates constant brake application detected.
Symptoms
- Cruise control disengages immediately
- Brake lights always on
- ABS light on
- Shift interlock always released
Common causes
- Brake switch stuck closed
- Wiring shorted to voltage
- Switch plunger stuck
- Pedal not fully returning
Diagnostic steps
- Check if brake lights stay on with pedal released
- Test switch at rest and applied positions
- Inspect switch mounting
- Check pedal return spring
- Look for wiring shorts to voltage
Repair notes
Replace brake switch. Check pedal return mechanism.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Chassis codes on this vehicle
C0021
LF Wheel Speed Sensor Range/Performance
C0021
LF Wheel Speed Sensor Range/Performance
C0022
RF Wheel Speed Sensor Range/Performance
C0022
RF Wheel Speed Sensor Range/Performance
C0023
LR Wheel Speed Sensor Range/Performance
C0023
LR Wheel Speed Sensor Range/Performance
C0024
RR Wheel Speed Sensor Range/Performance
C0024
RR Wheel Speed Sensor Range/Performance
C0025
LF Wheel Speed Sensor Circuit Intermittent
C0025
LF Wheel Speed Sensor Circuit Intermittent