P0101moderate severityPowertrain
Mass Air Flow (MAF) Circuit Range/Performance
on 2019 Jeep Cherokee 3.2L V6 · AWD
What this code means
The MAF sensor reading is outside the expected range for the current engine operating conditions.
Symptoms
- Check Engine Light
- Poor fuel economy
- Hesitation
- Rough idle
- Stalling
Common causes
- Dirty MAF sensor
- Intake air leak
- Restricted air filter
- Faulty MAF sensor
- Exhaust leak near O2 sensor
Diagnostic steps
- Compare MAF reading to spec at idle and 2500 RPM
- Check for vacuum leaks
- Inspect air filter
- Clean MAF sensor
- Check for exhaust leaks
Repair notes
Clean or replace MAF sensor. Repair any intake leaks.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1