Back to 2010 Jeep Commander
Help
2010 JEEP COMMANDER
3.7L V6•RWD•AUTOMATIC•gas
4 active safety recalls on this vehicle — view recalls
Founding sponsor spot is openYour name on every procedure for this vehicle, permanently.Sponsor — $99 →
Repairs0Labor547Torque3349Fluid6DTC894Battery1Maintenance0Recalls4
P3000moderate severityPowertrain

Turbo/Supercharger Boost Control Module Performance

on 2010 Jeep Commander 3.7L V6 · RWD

What this code means

The PCM detected the turbo/supercharger boost control module is not responding correctly to commanded boost levels. The module regulates wastegate or bypass valve position to control boost pressure.

Symptoms

  • Check Engine Light
  • Reduced boost pressure
  • Loss of power under acceleration
  • Turbo lag increased
  • Poor fuel economy

Common causes

  • Faulty boost control module
  • Wastegate actuator failure
  • Vacuum/pressure line leak
  • Corroded module connector
  • PCM communication error

Diagnostic steps

  1. Read freeze frame data and boost PIDs
  2. Command boost control module through scan tool
  3. Inspect vacuum and pressure lines to wastegate
  4. Check boost control module connector and wiring
  5. Measure actual vs commanded boost pressure

Repair notes

Replace boost control module or repair wiring. Verify wastegate actuator operation after repair.

🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.

Other Powertrain codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years and Jeff Moore · Master Lexus & Toyota Mechanic · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
Share:XRedditFBWhatsAppThreadsEmail
⚠ STILL BEHIND THE PAYWALL
The 2010 Jeep Commander repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Jeep Commander — $99 →
Building an app?
Free API access to all this data — 50 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →