B0122low severityBody
Theft Deterrent Indicator Lamp Circuit
on 2007-2011 Jeep Compass 2.0L I4 · AWD
What this code means
Malfunction in the theft deterrent system indicator lamp circuit. The security light in the dash does not operate correctly.
Symptoms
- Security light always on
- Security light never illuminates
- Light does not flash when system is armed
- Cannot determine system status
Common causes
- Burnt out indicator LED
- Instrument cluster fault
- BCM indicator output failure
- Wiring issue
Diagnostic steps
- Check indicator lamp operation
- Test BCM indicator output
- Inspect cluster wiring
- Check instrument cluster
Repair notes
Replace indicator lamp/LED in cluster or repair wiring.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Body codes on this vehicle
B0001
Driver Frontal Stage 1 Deployment Control
B0002
Driver Frontal Stage 2 Deployment Control
B0003
Passenger Frontal Stage 1 Deployment Control
B0004
Passenger Frontal Stage 2 Deployment Control
B0005
Driver Knee Airbag Deployment Circuit
B0006
Passenger Knee Airbag Deployment Circuit
B0007
Rear Left Side Airbag Deployment Circuit
B0008
Rear Right Side Airbag Deployment Circuit
B0010
Driver Side Airbag Deployment
B0011
Driver Side Airbag Deployment Circuit Open