B0402low severityBody
Tachometer Circuit Malfunction
on 2010 Jeep Compass 2.4L I4 · AWD
What this code means
The tachometer gauge is not functioning or displays incorrect RPM readings.
Symptoms
- Tachometer reads zero
- Tachometer needle erratic
- Tachometer bouncing at idle
- Gauge needle stuck
Common causes
- Instrument cluster stepper motor failure
- Cluster circuit board fault
- RPM signal issue from PCM
- Wiring problem
Diagnostic steps
- Check RPM signal from PCM with scan tool
- Test tachometer stepper motor
- Inspect cluster circuit board
- Check wiring from PCM to cluster
Repair notes
Replace instrument cluster stepper motor or circuit board.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Body codes on this vehicle
B0001
Driver Frontal Stage 1 Deployment Control
B0002
Driver Frontal Stage 2 Deployment Control
B0003
Passenger Frontal Stage 1 Deployment Control
B0004
Passenger Frontal Stage 2 Deployment Control
B0005
Driver Knee Airbag Deployment Circuit
B0006
Passenger Knee Airbag Deployment Circuit
B0007
Rear Left Side Airbag Deployment Circuit
B0008
Rear Right Side Airbag Deployment Circuit
B0010
Driver Side Airbag Deployment
B0011
Driver Side Airbag Deployment Circuit Open