B0103moderate severityBody
Immobilizer Antenna Ring Circuit
on 2017 Jeep Compass 2.0L I4 Turbo · AWD
What this code means
Malfunction in the immobilizer antenna ring (transponder receiver coil) around the ignition lock cylinder or start button.
Symptoms
- Intermittent no-start
- Security light on
- Key sometimes not recognized
- Works with key held in specific position
Common causes
- Faulty antenna ring coil
- Wiring damage from steering column work
- Connector loose
- Coil winding open or shorted
Diagnostic steps
- Measure antenna ring resistance
- Inspect connector at steering column
- Check wiring from antenna to immobilizer module
- Test with oscilloscope for signal
Repair notes
Replace immobilizer antenna ring. Ensure connector is fully seated after steering column work.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Body codes on this vehicle
B0001
Driver Frontal Stage 1 Deployment Control
B0001
Driver Frontal Stage 1 Deployment Control
B0002
Driver Frontal Stage 2 Deployment Control
B0002
Driver Frontal Stage 2 Deployment Control
B0003
Passenger Frontal Stage 1 Deployment Control
B0003
Passenger Frontal Stage 1 Deployment Control
B0004
Passenger Frontal Stage 2 Deployment Control
B0004
Passenger Frontal Stage 2 Deployment Control
B0005
Driver Knee Airbag Deployment Circuit
B0005
Driver Knee Airbag Deployment Circuit