C0222moderate severityChassis
EPS Control Module Voltage High
on 2017 Jeep Compass 2.0L I4 Turbo · AWD
What this code means
The EPS module supply voltage exceeds the maximum safe operating threshold.
Symptoms
- EPS warning light
- EPS assist may shut down
- Warning for electrical system
Common causes
- Alternator overcharging
- Voltage regulator failure
- Jump-starting voltage spike
- Aftermarket charger connected while running
Diagnostic steps
- Test charging system voltage (should be 13.5-14.7V)
- Check alternator voltage regulator
- Inspect for aftermarket electrical accessories
- Monitor system voltage under various loads
Repair notes
Repair overcharging alternator. Replace voltage regulator.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Chassis codes on this vehicle
C0021
LF Wheel Speed Sensor Range/Performance
C0021
LF Wheel Speed Sensor Range/Performance
C0022
RF Wheel Speed Sensor Range/Performance
C0022
RF Wheel Speed Sensor Range/Performance
C0023
LR Wheel Speed Sensor Range/Performance
C0023
LR Wheel Speed Sensor Range/Performance
C0024
RR Wheel Speed Sensor Range/Performance
C0024
RR Wheel Speed Sensor Range/Performance
C0025
LF Wheel Speed Sensor Circuit Intermittent
C0025
LF Wheel Speed Sensor Circuit Intermittent