C0425moderate severityChassis
Pre-Collision System Sensor Fusion Error
on 2017 Jeep Compass 2.0L I4 Turbo · AWD
What this code means
The pre-collision system detects a mismatch between radar and camera object detection data.
Symptoms
- PCS temporarily disabled
- Intermittent PCS warnings
- False collision alerts or no alerts
- System unreliable in certain conditions
Common causes
- Radar or camera misalignment
- Sensor calibration drift
- One sensor partially blocked
- Environmental interference
Diagnostic steps
- Perform radar alignment check
- Calibrate forward camera
- Clean all sensor surfaces
- Check for software updates
- Test in controlled conditions
Repair notes
Calibrate all PCS sensors. Perform both static and dynamic calibration as required.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Chassis codes on this vehicle
C0021
LF Wheel Speed Sensor Range/Performance
C0021
LF Wheel Speed Sensor Range/Performance
C0022
RF Wheel Speed Sensor Range/Performance
C0022
RF Wheel Speed Sensor Range/Performance
C0023
LR Wheel Speed Sensor Range/Performance
C0023
LR Wheel Speed Sensor Range/Performance
C0024
RR Wheel Speed Sensor Range/Performance
C0024
RR Wheel Speed Sensor Range/Performance
C0025
LF Wheel Speed Sensor Circuit Intermittent
C0025
LF Wheel Speed Sensor Circuit Intermittent