P2504critical severityPowertrain
Charging System Voltage High
on 2017 Jeep Compass 2.0L I4 Turbo · AWD
What this code means
Charging system output voltage exceeds maximum safe threshold.
Symptoms
- Battery boiling/swelling
- Bulbs burning out frequently
- Check engine light
- Electrical component damage
Common causes
- Failed voltage regulator
- ECM charging control fault
- Ground strap issue
Diagnostic steps
- Measure charging voltage at various RPM
- Check voltage regulator
- Inspect ground straps
Repair notes
Replace alternator or voltage regulator. Check and repair grounds. Overcharging can damage expensive electronics.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1