P1196moderate severityPowertrain
O2 Sensor 1/2 Slow During Catalytic Monitor
on 2006 Jeep Grand Cherokee 5.7L V8 Hemi · 4WD
What this code means
The PCM has detected that the downstream oxygen sensor on Bank 1 is responding too slowly during the catalytic converter efficiency monitor. The downstream sensor should show a relatively stable voltage if the catalyst is working properly.
Symptoms
- Check Engine Light
- Failed emissions test
- Slightly reduced fuel economy
Common causes
- Aging downstream O2 sensor
- Exhaust leak between catalytic converter and sensor
- Wiring or connector corrosion
- Deteriorated catalytic converter causing abnormal readings
- Fuel system issue affecting exhaust composition
Diagnostic steps
- Monitor downstream O2 sensor voltage pattern on scan tool
- Compare upstream and downstream sensor activity
- Check for exhaust leaks near downstream sensor
- Inspect downstream O2 sensor wiring and connector
- Evaluate catalytic converter efficiency
Repair notes
Replace the downstream O2 sensor Bank 1 if it fails response time testing.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1