Free API
Back to 1965 Jeep J-Series Pickup
Help
1965 JEEP J-SERIES PICKUP
327ci V8•4WD•MANUAL•gas
Founding sponsor spot is openYour name on every procedure for this vehicle, permanently.Sponsor — $99 →
Repairs0Labor465Torque140Fluid10DTC0Battery1Maintenance0Recalls0
Fluid · Manual Transmission

Manual Transmission

for 1965 Jeep J-Series Pickup 327ci V8 · 4WD
Fluid Type
SAE 80W-90 GL-4 or GL-5
Spec: API GL-4 or GL-5
Capacity
4qt
3.78 L
Drain & Refill
4 qt
3.78 L
Change Interval
50,000 mi
80,450 km
Data quality
Book-style estimate
Not yet expert-verified. Have the real number? Correct it below — takes 30 seconds.

Notes

T-98 4-speed manual transmission typical with V8. Heavier-duty than I6 transmissions.

Other fluid systems on this vehicle

🔌 Need this data in your app? It's all in the free API →
🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
Share:XRedditFBWhatsAppThreadsEmail
⚠ STILL BEHIND THE PAYWALL
The 1965 Jeep J-Series Pickup repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Jeep J-Series Pickup — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →