P0301high severityPowertrain

Cylinder 1 Misfire Detected

on 2012 Jeep Wrangler 3.6L V6 ยท 4WD

What this code means

The PCM has detected a misfire condition specifically in cylinder 1.

Symptoms

  • Check Engine Light
  • Rough idle
  • Vibration
  • Loss of power
  • Fuel smell from exhaust
  • Poor fuel economy

Common causes

  • Worn or fouled spark plug #1
  • Faulty ignition coil #1
  • Damaged spark plug wire
  • Faulty fuel injector #1
  • Low compression cylinder 1
  • Vacuum leak near cylinder 1

Diagnostic steps

  1. Swap ignition coil #1 with another cylinder to see if misfire follows
  2. Inspect spark plug #1
  3. Test fuel injector #1
  4. Check compression cylinder 1
  5. Check for vacuum leaks near cylinder 1

Repair notes

Try swapping coil first. If misfire follows the coil, replace it. If not, check plug, injector, then compression.

Other Powertrain codes on this vehicle

๐Ÿ”ง Database maintained under the daily editorial review of Chris Hackleman ยท Master Technician ยท 20+ years and Jeff Moore ยท Master Mechanic ยท 20+ years. Spot an error? Use the Help link above โ€” a human reads every report.
Stuck on this repair? Take it to The Diag Desk โ€” ask a master tech about this exact car โ†’ real human answer within 24h, never AI
โš  STILL BEHIND THE PAYWALL
The 2012 Jeep Wrangler repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy โ€” and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Jeep Wrangler โ€” $99 โ†’
Building an app?
Free API access to all this data โ€” 10 requests/day, no card required.
Get an API key โ†’
Run a shop?
Manage repairs, estimates, and customers with ShopBase โ€” $249/mo, all features included.
Try ShopBase โ†’