U0258low severityNetwork
Lost Communication With Auxiliary Heater Control Module
on 2012 Jeep Wrangler 3.6L V6 · 4WD
What this code means
The network lost communication with the auxiliary heater control module. The auxiliary or supplemental heater may not operate.
Symptoms
- Auxiliary heater not working
- Slow cabin warm-up
- Heater warning message
Common causes
- Faulty auxiliary heater control module
- Wiring or connector fault
- Power or ground loss
- Bus communication fault
Diagnostic steps
- Scan for stored codes
- Check module power and ground
- Inspect bus wiring and connectors
- Replace heater module if faulty
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Network codes on this vehicle
U0001
High Speed CAN Communication Bus
U0002
High Speed CAN Communication Bus Performance
U0003
High Speed CAN Communication Bus (+) Open
U0004
High Speed CAN Communication Bus (+) Low
U0005
High Speed CAN Communication Bus (+) High
U0006
High Speed CAN Communication Bus (-) Open
U0007
High Speed CAN Communication Bus (-) Low
U0008
High Speed CAN Communication Bus (-) High
U0009
High Speed CAN Communication Bus Shorted Together
U0010
Medium Speed CAN Communication Bus