U0259low severityNetwork
Lost Communication With Fuel Fired Heater Control Module
on 2012 Jeep Wrangler 3.6L V6 · 4WD
What this code means
The vehicle's network has lost contact with the fuel fired heater control module. This is usually a wiring or module fault affecting the auxiliary heater.
Symptoms
- No or weak cabin heat
- Warning light on dash
- Auxiliary heater inoperative
Common causes
- Faulty wiring or connector to heater module
- Failed fuel fired heater control module
- Blown fuse or power supply issue
- Corrupted CAN bus network
Diagnostic steps
- Scan for related communication codes
- Check power and ground at heater module
- Inspect wiring and connectors for damage
- Test CAN bus continuity to module
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Network codes on this vehicle
U0001
High Speed CAN Communication Bus
U0002
High Speed CAN Communication Bus Performance
U0003
High Speed CAN Communication Bus (+) Open
U0004
High Speed CAN Communication Bus (+) Low
U0005
High Speed CAN Communication Bus (+) High
U0006
High Speed CAN Communication Bus (-) Open
U0007
High Speed CAN Communication Bus (-) Low
U0008
High Speed CAN Communication Bus (-) High
U0009
High Speed CAN Communication Bus Shorted Together
U0010
Medium Speed CAN Communication Bus