P0041moderate severityPowertrain

O2 Sensor Signals Swapped Bank 1 Sensor 2 / Bank 2 Sensor 2

on 2014 Jeep Wrangler 3.6L V6 ยท 4WD

What this code means

The downstream O2 sensor signals for Bank 1 and Bank 2 appear to be swapped.

Symptoms

  • Check Engine Light
  • Incorrect catalyst monitoring
  • Failed emissions

Common causes

  • Sensor connectors swapped
  • Wiring crossed after service

Diagnostic steps

  1. Verify downstream sensor connections
  2. Trace wiring to PCM

Repair notes

Correct the sensor connector routing.

Other Powertrain codes on this vehicle

๐Ÿ”ง Database maintained under the daily editorial review of Chris Hackleman ยท Master Technician ยท 20+ years and Jeff Moore ยท Master Mechanic ยท 20+ years. Spot an error? Use the Help link above โ€” a human reads every report.
Stuck on this repair? Take it to The Diag Desk โ€” ask a master tech about this exact car โ†’ real human answer within 24h, never AI
โš  STILL BEHIND THE PAYWALL
The 2014 Jeep Wrangler repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy โ€” and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Jeep Wrangler โ€” $99 โ†’
Building an app?
Free API access to all this data โ€” 10 requests/day, no card required.
Get an API key โ†’
Run a shop?
Manage repairs, estimates, and customers with ShopBase โ€” $249/mo, all features included.
Try ShopBase โ†’