U0186low severityNetwork
Lost Communication With Audio Amplifier
on 2016 Jeep Wrangler 3.6L V6 · 4WD
What this code means
A control module lost communication with the audio amplifier over the data bus. This can result in no sound or degraded audio output.
Symptoms
- No sound from speakers
- Distorted or intermittent audio
- Fault code stored
Common causes
- Faulty audio amplifier
- Wiring or connector fault
- Blown fuse or power loss to amplifier
- Damaged data bus circuit
Diagnostic steps
- Scan for related U-codes on all modules
- Check power and ground at amplifier
- Inspect bus wiring and connectors for damage
- Test module communication with scan tool
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Network codes on this vehicle
U0001
High Speed CAN Communication Bus
U0002
High Speed CAN Communication Bus Performance
U0003
High Speed CAN Communication Bus (+) Open
U0004
High Speed CAN Communication Bus (+) Low
U0005
High Speed CAN Communication Bus (+) High
U0006
High Speed CAN Communication Bus (-) Open
U0007
High Speed CAN Communication Bus (-) Low
U0008
High Speed CAN Communication Bus (-) High
U0009
High Speed CAN Communication Bus Shorted Together
U0010
Medium Speed CAN Communication Bus