P1507moderate severityPowertrain
IAC Valve Closing Coil Circuit Open
on 2010 Kia Forte 2.0L I4 · FWD
What this code means
The PCM has detected an open circuit in the IAC valve closing coil. Without the closing coil functioning, the IAC valve cannot reduce airflow to lower idle speed when needed.
Symptoms
- Check Engine Light
- High idle speed
- Idle speed does not decrease when warmed up
- Engine races at idle
Common causes
- Broken wire in IAC closing coil circuit
- Corroded IAC connector pins
- Faulty IAC valve with open closing coil
- PCM connector corrosion
- Wiring harness damage
Diagnostic steps
- Test IAC closing coil resistance
- Inspect IAC connector for corrosion
- Check wiring continuity from PCM to IAC closing coil
- Verify PCM output to closing coil
- Compare opening and closing coil resistances
Repair notes
Replace the IAC valve if the closing coil is open internally; repair wiring or connector if external.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0011
Intake Camshaft Position Timing Over-Advanced Bank 1
P0012
Intake Camshaft Position Timing Over-Retarded Bank 1
P0013
Exhaust Camshaft Position Actuator Circuit/Open Bank 1
P0014
Exhaust Camshaft Position Timing Over-Advanced Bank 1
P0015
Exhaust Camshaft Position Timing Over-Retarded Bank 1