B0037critical severityBody
Rollover Sensor Circuit
on 2015 Kia Forte 1.8L I4 · FWD
What this code means
Malfunction in the rollover detection sensor. This sensor monitors vehicle orientation to deploy curtain airbags during a rollover event.
Symptoms
- Airbag warning light on
- SRS fault stored
- Rollover protection inoperative
- Curtain airbags may not deploy in rollover
Common causes
- Faulty rollover sensor
- Sensor mounting issue
- Wiring fault
- Control module communication error
Diagnostic steps
- Scan SRS codes
- Inspect rollover sensor (typically mounted on roof or center of vehicle)
- Check wiring to sensor
- Measure circuit resistance
- Test sensor output with scan tool
Repair notes
Replace rollover sensor. Ensure proper mounting and orientation per manufacturer specifications.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Body codes on this vehicle
B0001
Driver Frontal Stage 1 Deployment Control
B0002
Driver Frontal Stage 2 Deployment Control
B0003
Passenger Frontal Stage 1 Deployment Control
B0004
Passenger Frontal Stage 2 Deployment Control
B0005
Driver Knee Airbag Deployment Circuit
B0006
Passenger Knee Airbag Deployment Circuit
B0007
Rear Left Side Airbag Deployment Circuit
B0008
Rear Right Side Airbag Deployment Circuit
B0009
Rear Center Airbag Deployment Circuit
B0010
Driver Side Airbag Deployment