B0123low severityBody
Hood Ajar Switch Circuit
on 2015 Kia Forte 1.8L I4 · FWD
What this code means
Malfunction in the hood ajar switch circuit used by the theft deterrent system and vehicle status monitoring.
Symptoms
- Hood ajar warning always on or off
- Theft system does not detect hood opening
- Interior lights triggered by phantom hood open
Common causes
- Faulty hood switch
- Switch out of adjustment
- Wiring damage in engine bay
- Corroded switch from engine bay moisture
Diagnostic steps
- Check hood switch alignment
- Test switch continuity
- Inspect wiring
- Clean or adjust switch
- Test circuit voltage at BCM
Repair notes
Adjust or replace hood ajar switch. Protect wiring from engine bay heat and moisture.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Body codes on this vehicle
B0001
Driver Frontal Stage 1 Deployment Control
B0002
Driver Frontal Stage 2 Deployment Control
B0003
Passenger Frontal Stage 1 Deployment Control
B0004
Passenger Frontal Stage 2 Deployment Control
B0005
Driver Knee Airbag Deployment Circuit
B0006
Passenger Knee Airbag Deployment Circuit
B0007
Rear Left Side Airbag Deployment Circuit
B0008
Rear Right Side Airbag Deployment Circuit
B0009
Rear Center Airbag Deployment Circuit
B0010
Driver Side Airbag Deployment