C0130moderate severityChassis
Brake Pad Wear Sensor Circuit Front
on 2015 Kia Forte 1.8L I4 · FWD
What this code means
The front brake pad wear sensor circuit indicates a fault or that pads have reached minimum thickness.
Symptoms
- Brake pad warning light
- Service brakes message on dash
- Grinding noise from front brakes
Common causes
- Front brake pads worn to minimum
- Wear sensor wire broken or chafed
- Sensor connector disconnected during service
- Sensor embedded in pad consumed by wear
Diagnostic steps
- Check front brake pad thickness visually
- Inspect wear sensor wire for damage
- Check sensor connector
- Measure pad thickness with calipers
- Compare both front pad sets
Repair notes
Replace front brake pads and wear sensors. Sensors are typically one-time use.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Chassis codes on this vehicle
C0021
LF Wheel Speed Sensor Range/Performance
C0022
RF Wheel Speed Sensor Range/Performance
C0023
LR Wheel Speed Sensor Range/Performance
C0024
RR Wheel Speed Sensor Range/Performance
C0025
LF Wheel Speed Sensor Circuit Intermittent
C0026
RF Wheel Speed Sensor Circuit Intermittent
C0027
LR Wheel Speed Sensor Circuit Intermittent
C0028
RR Wheel Speed Sensor Circuit Intermittent
C0035
Left Front Wheel Speed Sensor Circuit
C0036
Left Front Wheel Speed Signal Erratic