C0201high severityChassis
EPS Motor Circuit Overcurrent
on 2015 Kia Forte 1.8L I4 · FWD
What this code means
The EPS control module detected excessive current draw from the power steering motor.
Symptoms
- EPS warning light
- Power steering assist reduced
- Steering may become very heavy suddenly
- EPS fault message
Common causes
- EPS motor internal short
- Steering gear binding
- Low tire pressure causing excessive load
- EPS motor bearing failure
- Insufficient module power supply voltage
Diagnostic steps
- Measure EPS motor current draw
- Check tire pressures
- Inspect steering gear for binding
- Test motor winding resistance for shorts
- Check battery voltage and alternator output
Repair notes
Replace EPS motor if shorted. Check steering gear for mechanical binding. Verify electrical supply.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Chassis codes on this vehicle
C0021
LF Wheel Speed Sensor Range/Performance
C0022
RF Wheel Speed Sensor Range/Performance
C0023
LR Wheel Speed Sensor Range/Performance
C0024
RR Wheel Speed Sensor Range/Performance
C0025
LF Wheel Speed Sensor Circuit Intermittent
C0026
RF Wheel Speed Sensor Circuit Intermittent
C0027
LR Wheel Speed Sensor Circuit Intermittent
C0028
RR Wheel Speed Sensor Circuit Intermittent
C0035
Left Front Wheel Speed Sensor Circuit
C0036
Left Front Wheel Speed Signal Erratic