Back to 2015 Kia Forte
Help
2015 KIA FORTE
1.8L I4•FWD•AUTOMATIC•gas
1 active safety recall on this vehicle — view recalls🏆Sponsored by Simon-Olivier Ricci
Repairs403Labor504Torque3451Fluid7DTC911Battery1Maintenance0Recalls1
P1505moderate severityPowertrain

IAC Valve Opening Coil Circuit Open

on 2015 Kia Forte 1.8L I4 · FWD

What this code means

The PCM has detected an open circuit in the IAC valve opening coil. The idle air control valve uses separate coils for opening and closing; the opening coil circuit is not completing the electrical path.

Symptoms

  • Check Engine Light
  • Low idle speed
  • Engine stalling at idle
  • Rough idle
  • Engine dies when coming to a stop

Common causes

  • Broken wire in IAC opening coil circuit
  • Corroded IAC connector
  • Faulty IAC valve with open coil winding
  • PCM connector issue
  • Poor ground connection

Diagnostic steps

  1. Test IAC valve opening coil resistance with multimeter
  2. Inspect IAC connector for corrosion or loose pins
  3. Check wiring continuity from PCM to IAC opening coil
  4. Test PCM output to IAC opening coil
  5. Check ground circuit

Repair notes

Replace the IAC valve if the opening coil is internally open; repair wiring or connector if the external circuit is at fault.

🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.

Other Powertrain codes on this vehicle

🔌 Need this data in your app? It's all in the free API →
🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years and Jeff Moore · Master Lexus & Toyota Mechanic · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
Share:XRedditFBWhatsAppThreadsEmail
🔓 LIBERATED FOREVER
The 2015 Kia Forte 1.8L I4 repair data is free for every DIYer and shop on earth, permanently, because Simon-Olivier Ricci paid $99 to unlock it.
Mitchell1 charges $169/mo for this. ALLDATAdiy charges $30/yr per vehicle. Open Labor Project is free permanently, because of community sponsors like Simon-Olivier.
Free another vehicle →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →