Free API
P3002high severityPowertrain

Turbo/Supercharger Boost Control Circuit High

on 2015 Kia Forte 1.8L I4 · FWD

What this code means

The signal from the turbo boost control solenoid circuit is above the expected threshold. This can cause overboost or erratic boost control.

Symptoms

  • Check Engine Light
  • Overboost condition
  • Engine knock under load
  • Reduced power mode
  • Harsh acceleration surge

Common causes

  • Open circuit in boost solenoid ground
  • Faulty solenoid stuck open
  • PCM driver circuit failure
  • Damaged wiring harness
  • Failed boost pressure sensor

Diagnostic steps

  1. Measure voltage at boost solenoid connector
  2. Check solenoid ground circuit continuity
  3. Test solenoid coil resistance
  4. Inspect wiring for opens or chafing
  5. Command solenoid with scan tool and verify operation

Repair notes

Repair open circuit or replace boost control solenoid. Verify no overboost condition exists after repair.

Other Powertrain codes on this vehicle

🔧 Built by master technician Chris Hackleman · Master Technician · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
🔓 LIBERATED FOREVER
The 2015 Kia Forte 1.8L I4 repair data is free for every DIYer and shop on earth, permanently, because Simon-Olivier Ricci paid $99 to unlock it.
Mitchell1 charges $169/mo for this. ALLDATAdiy charges $30/yr per vehicle. Open Labor Project is free permanently, because of community sponsors like Simon-Olivier.
Free another vehicle →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →