Free API
P3013moderate severityPowertrain

Camshaft Profile Actuator A Stuck Bank 2

on 2015 Kia Forte 1.8L I4 · FWD

What this code means

The camshaft profile switching actuator for Bank 2, intake side, is mechanically stuck in one position.

Symptoms

  • Check Engine Light
  • Uneven power between cylinder banks
  • Misfires on one bank at high RPM
  • Vibration at certain RPM ranges
  • Reduced peak power

Common causes

  • Oil passage blockage Bank 2
  • Faulty actuator solenoid Bank 2
  • Low oil pressure
  • Worn actuator pins
  • Debris in oil gallery

Diagnostic steps

  1. Check oil condition
  2. Command Bank 2 cam profile switch
  3. Compare Bank 1 vs Bank 2 cam profile timing
  4. Test oil pressure at Bank 2 actuator feed
  5. Inspect actuator screen

Repair notes

Replace Bank 2 cam profile actuator solenoid. Clean oil passages.

Other Powertrain codes on this vehicle

🔧 Built by master technician Chris Hackleman · Master Technician · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
🔓 LIBERATED FOREVER
The 2015 Kia Forte 1.8L I4 repair data is free for every DIYer and shop on earth, permanently, because Simon-Olivier Ricci paid $99 to unlock it.
Mitchell1 charges $169/mo for this. ALLDATAdiy charges $30/yr per vehicle. Open Labor Project is free permanently, because of community sponsors like Simon-Olivier.
Free another vehicle →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with Auto Shop Base — $249/mo, all features included.
Try Auto Shop Base →