P3603high severityPowertrain

Enhanced Starter Motor Control Module Fault

on 2015 Kia Forte 1.8L I4 · FWD

What this code means

The enhanced or reinforced starter motor used in start-stop systems has a control module fault. These starters are designed for frequent cycling.

Symptoms

  • Start-stop disabled
  • Slow cranking after stop event
  • Starter noise during restart
  • Unusual vibration during start
  • Increased restart time

Common causes

  • Starter control module failure
  • Starter motor brush wear
  • Pinion gear engagement issue
  • Starter solenoid degradation
  • Excessive starter motor temperature

Diagnostic steps

  1. Read starter motor cycle count
  2. Test starter motor current draw
  3. Check starter engagement speed
  4. Monitor starter solenoid operation
  5. Measure voltage drop across starter circuit

Repair notes

Replace enhanced starter motor assembly. Standard starters are not suitable for start-stop equipped vehicles.

🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.

Other Powertrain codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years and Jeff Moore · Master Lexus & Toyota Mechanic · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
🔓 LIBERATED FOREVER
The 2015 Kia Forte 1.8L I4 repair data is free for every DIYer and shop on earth, permanently, because Simon-Olivier Ricci paid $99 to unlock it.
Mitchell1 charges $169/mo for this. ALLDATAdiy charges $30/yr per vehicle. Open Labor Project is free permanently, because of community sponsors like Simon-Olivier.
Free another vehicle →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →