Free API
P3655high severityPowertrain

GDI Fuel Metering Unit Control Stuck

on 2015 Kia Forte 1.8L I4 · FWD

What this code means

The high-pressure fuel pump metering unit that controls fuel volume entering the pump is stuck, causing incorrect fuel rail pressure.

Symptoms

  • Check Engine Light
  • Fuel pressure too high or too low
  • Engine stalling
  • Hard starting
  • Rough running
  • Fuel smell from engine

Common causes

  • Metering unit solenoid failure
  • Contaminated fuel blocking metering valve
  • Metering unit wiring short
  • Mechanical debris in metering valve
  • PCM driver circuit failure

Diagnostic steps

  1. Monitor fuel metering command vs actual rail pressure
  2. Test metering unit solenoid resistance
  3. Inspect fuel quality
  4. Command metering unit through range with scan tool
  5. Check PCM driver output

Repair notes

Replace high-pressure fuel pump metering unit. May require full pump replacement depending on design. Check fuel quality.

Other Powertrain codes on this vehicle

For shop owners
Diagnosing for customers?
Text them the estimate with photos and get approval in minutes with Auto Shop Base.
Talk to the ownerSee what's included
Built by a shop owner. Talk to Chris, not a sales rep.
🔧 Built by master technician Chris Hackleman · Master Technician · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
🔓 LIBERATED FOREVER
The 2015 Kia Forte 1.8L I4 repair data is free for every DIYer and shop on earth, permanently, because Simon-Olivier Ricci paid $99 to unlock it.
Mitchell1 charges $169/mo for this. ALLDATAdiy charges $30/yr per vehicle. Open Labor Project is free permanently, because of community sponsors like Simon-Olivier.
Free another vehicle →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
A free website, SEO and Google reviews with your shop software. Auto Shop Base Professional, $250/mo, with our labor times on every estimate.
See what's included →