U0001high severityNetwork
High Speed CAN Communication Bus
on 2015 Kia Forte 1.8L I4 · FWD
What this code means
General malfunction on the high-speed CAN bus network.
Symptoms
- Multiple warning lights
- Communication errors
- Some systems inoperative
- Scan tool communication issues
Common causes
- CAN bus wiring damage
- Shorted CAN H or CAN L wire
- Missing termination resistor
- Module failure pulling down bus
- Aftermarket device interference
Diagnostic steps
- Check for aftermarket devices on OBD port
- Measure CAN bus resistance (should be ~60 ohms)
- Scope CAN H and CAN L signals
- Check for damaged wiring
- Isolate modules one at a time
Repair notes
CAN bus issues can be complex. Check wiring first. Remove aftermarket devices.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Network codes on this vehicle
U0002
High Speed CAN Communication Bus Performance
U0003
High Speed CAN Communication Bus (+) Open
U0004
High Speed CAN Communication Bus (+) Low
U0005
High Speed CAN Communication Bus (+) High
U0006
High Speed CAN Communication Bus (-) Open
U0007
High Speed CAN Communication Bus (-) Low
U0008
High Speed CAN Communication Bus (-) High
U0009
High Speed CAN Communication Bus Shorted Together
U0010
Medium Speed CAN Communication Bus
U0011
Control Module Communication Bus A Low