B0043critical severityBody
Rear Impact Sensor Circuit
on 2007 Kia Optima 2.4L I4 · FWD
What this code means
Malfunction in the rear impact sensor circuit. This sensor detects rear-end collision severity for fuel shutoff and restraint deployment.
Symptoms
- Airbag warning light on
- SRS fault stored
- Rear collision protection degraded
Common causes
- Faulty rear impact sensor
- Wiring damage from rear collision
- Trunk area moisture intrusion
- Sensor mounting loose
Diagnostic steps
- Scan SRS codes
- Inspect rear impact sensor in trunk or rear panel area
- Check wiring
- Measure circuit resistance
Repair notes
Replace rear impact sensor or repair wiring. Check for moisture intrusion in trunk area.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Body codes on this vehicle
B0001
Driver Frontal Stage 1 Deployment Control
B0002
Driver Frontal Stage 2 Deployment Control
B0003
Passenger Frontal Stage 1 Deployment Control
B0004
Passenger Frontal Stage 2 Deployment Control
B0005
Driver Knee Airbag Deployment Circuit
B0006
Passenger Knee Airbag Deployment Circuit
B0007
Rear Left Side Airbag Deployment Circuit
B0008
Rear Right Side Airbag Deployment Circuit
B0010
Driver Side Airbag Deployment
B0011
Driver Side Airbag Deployment Circuit Open