U0004high severityNetwork
High Speed CAN Communication Bus (+) Low
on 2025 Kia Seltos 2.0L I4 Smartstream · FWD
What this code means
The CAN High wire voltage is lower than expected, indicating a short to ground or excessive load on the bus.
Symptoms
- Communication failures
- Multiple DTCs from various modules
- Intermittent system operation
Common causes
- CAN H wire shorted to ground
- Module pulling CAN H low
- Damaged wiring insulation
- Water intrusion in connector
Diagnostic steps
- Measure CAN H voltage
- Disconnect modules one at a time to find short source
- Inspect wiring for chafing against ground
- Check connectors for moisture
Repair notes
Find and repair the short to ground on the CAN H wire. Inspect for damaged insulation.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Network codes on this vehicle
U0001
High Speed CAN Communication Bus
U0002
High Speed CAN Communication Bus Performance
U0003
High Speed CAN Communication Bus (+) Open
U0005
High Speed CAN Communication Bus (+) High
U0006
High Speed CAN Communication Bus (-) Open
U0007
High Speed CAN Communication Bus (-) Low
U0008
High Speed CAN Communication Bus (-) High
U0009
High Speed CAN Communication Bus Shorted Together
U0010
Medium Speed CAN Communication Bus
U0011
Control Module Communication Bus A Low