AWD Coupling (Haldex)

for 2008 Land Rover Freelander 3.2L I6 · AWD

Fluid Type

Haldex coupling oil

Spec: LR003147 (Shell TAM 4WD)

Capacity

0.85qt

0.8 L

Drain & Refill

0.85 qt

0.8 L

Change Interval

38,000 mi

61,142 km

Data quality

Book-style estimate

Not yet expert-verified. Have the real number? Correct it below — takes 30 seconds.

Notes

Haldex Gen 4. No filter on this generation. Gen 4 uses lifetime fill per LR but service extends life; drain plug at coupling rear, fill via level plug on side.

Other fluid systems on this vehicle

Automatic Transmission

9.5 qt

Washer Fluid

5.5 qt

🔌 Need this data in your app? It's all in the free API →

🔧 Built by master technician Chris Hackleman · Master Technician · 20+ years. Spot an error? Use the Help link above — a human reads every report.

Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI

Share:X Reddit FB WhatsApp Threads Email

⚠ STILL BEHIND THE PAYWALL

The 2008 Land Rover Freelander repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.

The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.

Sponsor the Land Rover Freelander — $99 →

Building an app?

Free API access to all this data — 10 requests/day, no card required.

Get an API key →

Run a shop?

Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.

Try ShopBase →