Free API
4.3L V8RWDAUTOMATICgas
Founding sponsor spot is openYour name on every procedure for this vehicle, permanently.Sponsor — $99 →
C1231moderate severityChassis

Zero Point Calibration of Deceleration Sensor Undone

on 2007 Lexus GS 430 4.3L V8 · RWD

What this code means

The deceleration (G) sensor zero point calibration has not been completed after service. No OBD P-code equivalent for this chassis code.

Symptoms

  • VSC/ABS warning lights on
  • Stability control inactive
  • Traction control disabled

Common causes

  • Calibration not performed after service
  • Sensor recently replaced
  • Battery/ECU recently disconnected
  • Faulty deceleration sensor

Diagnostic steps

  1. Park vehicle on level ground
  2. Perform zero point calibration with scan tool
  3. Verify sensor output values
  4. Clear codes and road test

Other Chassis codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 2007 Lexus GS 430 repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Lexus GS 430 — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →