P3005critical severityPowertrain
Turbo/Supercharger Wastegate Actuator Stuck Closed
on 2012 Lexus LFA 4.8L V10 · RWD
What this code means
The wastegate actuator is stuck in the closed position, causing excessive boost pressure. This is a critical condition that can cause engine damage.
Symptoms
- Check Engine Light
- Overboost condition
- Engine knock/detonation
- Boost pressure beyond specification
- Possible engine damage if not addressed
- Fuel enrichment at full boost
Common causes
- Wastegate actuator rod seized closed
- Actuator solenoid stuck energized
- Wastegate valve carbon welded shut
- Control rod bent or binding
- PCM commanding max boost erroneously
Diagnostic steps
- Check boost pressure immediately - compare to spec
- Inspect wastegate actuator rod movement
- Test actuator solenoid de-energized state
- Check for carbon deposits seizing valve
- Review PCM boost target values
Repair notes
Immediately address to prevent engine damage. Replace wastegate actuator. Inspect turbo and engine for damage from overboost.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0011
Intake Camshaft Position Timing Over-Advanced Bank 1
P0012
Intake Camshaft Position Timing Over-Retarded Bank 1
P0013
Exhaust Camshaft Position Actuator Circuit/Open Bank 1
P0014
Exhaust Camshaft Position Timing Over-Advanced Bank 1
P0015
Exhaust Camshaft Position Timing Over-Retarded Bank 1