Free API
4.0L V8RWDAUTOMATICgas
Founding sponsor spot is openYour name on every procedure for this vehicle, permanently.Sponsor — $99 →
P2137high severityPowertrain

Throttle/Pedal Position Sensor/Switch E/F Voltage Correlation

on 1998 Lexus LS 400 4.0L V8 · RWD

What this code means

The E and F pedal or throttle position sensor signals do not agree with each other. The PCM sees a mismatch between the two redundant channels.

Symptoms

  • Check engine light on
  • Reduced power / limp mode
  • Erratic acceleration

Common causes

  • Faulty accelerator pedal position sensor assembly
  • Wiring fault in E or F circuit
  • Poor connector contact
  • PCM signal processing fault

Diagnostic steps

  1. Scan and compare E and F sensor values
  2. Inspect shared wiring and connectors
  3. Wiggle-test harness for intermittent faults
  4. Replace pedal sensor assembly if signals mismatch

Other Powertrain codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 1998 Lexus LS 400 repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Lexus LS 400 — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →