P0726moderate severityPowertrain
Engine Speed Input Circuit Range/Performance
on 2010 Lexus RX 350 3.5L V6 · AWD
What this code means
The engine speed signal at the transmission controller is present but out of the expected range. Shift and lockup timing depend on an accurate RPM value.
Symptoms
- Poor shift quality
- Torque converter shudder
- Check engine light on
Common causes
- Faulty engine speed sensor
- Signal interference or noise
- Wiring issue to TCM
- Faulty PCM/TCM
Diagnostic steps
- Retrieve codes and freeze frame
- Compare RPM signal against actual engine speed
- Inspect wiring for damage or noise sources
- Replace sensor if reading is off
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0005
Fuel Shutoff Valve A Control Circuit/Open
P0006
Fuel Shutoff Valve A Control Circuit Low
P0007
Fuel Shutoff Valve A Control Circuit High
P0008
Engine Position System Performance - Bank 1
P0009
Engine Position System Performance - Bank 2
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1