Free API
2.0L I4FWDAUTOMATICgas
Founding sponsor spot is openYour name on every procedure for this vehicle, permanently.Sponsor — $99 →
P0845moderate severityPowertrain

Transmission Fluid Pressure Sensor/Switch B Circuit

on 2019 Lexus UX 200 2.0L I4 · FWD

What this code means

The PCM detected a problem in the transmission fluid pressure sensor or switch circuit B. This affects pressure monitoring and can degrade shift performance.

Symptoms

  • Erratic shifting
  • Transmission warning light
  • Possible limp mode

Common causes

  • Faulty pressure sensor B
  • Damaged wiring or connector
  • Low transmission fluid
  • Internal hydraulic fault

Diagnostic steps

  1. Retrieve fault codes and freeze frame
  2. Check fluid level and condition
  3. Inspect sensor B wiring and connector
  4. Test sensor resistance and signal

Other Powertrain codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 2019 Lexus UX 200 repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Lexus UX 200 — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →