B1020low severityBody
TPMS System Initialization Required
on 2011 Lincoln MKX 3.7L V6 · AWD
What this code means
The TPMS system requires sensor initialization/relearn after tire rotation, sensor replacement, or wheel service.
Symptoms
- TPMS warning light on
- Tire positions showing incorrect locations
- Pressures displayed for wrong wheels
Common causes
- Tire rotation without TPMS relearn
- Sensor replaced without programming
- Wheels swapped between vehicles
- TPMS reset not performed after service
Diagnostic steps
- Perform TPMS sensor relearn procedure
- Use TPMS tool to trigger each sensor in order
- Follow vehicle-specific relearn procedure
- Verify all sensors are registered
Repair notes
Perform TPMS relearn/initialization procedure per manufacturer instructions after any tire service.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Body codes on this vehicle
B0001
Driver Frontal Stage 1 Deployment Control
B0001
Driver Frontal Stage 1 Deployment Control
B0002
Driver Frontal Stage 2 Deployment Control
B0002
Driver Frontal Stage 2 Deployment Control
B0003
Passenger Frontal Stage 1 Deployment Control
B0003
Passenger Frontal Stage 1 Deployment Control
B0004
Passenger Frontal Stage 2 Deployment Control
B0004
Passenger Frontal Stage 2 Deployment Control
B0005
Driver Knee Airbag Deployment Circuit
B0005
Driver Knee Airbag Deployment Circuit